Find

For students
For PhDs
For employees

Department of Electrical and Computer Engineering

Publications by Electronics & Photonics

Are you looking for publications by Section of Electronics & Photonics? On this page you can find all the publications made by the Section of Electronics & Photonics - Department of Electrical and Computer Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and titles. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Liang Goh, G., Agarwala, S. & Wai Yee, Y. (2016). 3D printing of microfludic sensor for soft robots: a preliminary study in design and fabrication. In Proceedings of the 2nd International Conference on Progress in Additive Manufacturing (Pro-AM 2016) (Vol. Part F129095, pp. 177-181). Research Publishing, Singapore. https://doi.org/10.3850/2424-8967_V02-N778

Dikshit, V., Prasanth Nagalingam, A., Kumar, J. D., Yap, Y. L., Agarwala, S. & Wai Yee, Y. (2016). Out of plane compressive strength of 3D printed vertical pillared corrugated core structure. In Proceedings of the 2nd International Conference on Progress in Additive Manufacturin (Vol. Part F129095, pp. 128-133). Research Publishing, Singapore.

Agarwala, S. & Wai Yee, Y. (2016). 3D Printed Electronic Tracks for Bio-integrated Free-form Devices. In Proceedings of the 2nd International Conference on Progress in Additive Manufacturing (Vol. Part F129095, pp. 313-317)

Agarwala, S., Liang Goh, G. & Wai Yee, Y. (2017). Optimizing aerosol jet printing process of silver ink for printed electronics. In IOP Conf. Series: Materials Science and Engineering : 2nd International Conference on Mining, Material and Metallurgical Engineering (Vol. 191). IOP Publishing. https://doi.org/10.1088/1757-899X/191/1/012027

Agarwala, S., Liang Goh, G. & Wai Yee, Y. (2018). High resolution of aerosol jet printing of conducting ink for stretchable electronics. In Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018 (Vol. 2018-May, pp. 109-114) https://doi.org/10.25341/D4FS3W

Agarwala, S., Liang Goh, G. & Wai Yee, Y. (2018). Aerosol jet printed pH sensor based on carbon nanotubes for flexible electronics. In Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018) (Vol. 2018-May, pp. 88-94) https://doi.org/10.25341/D4Q59F

Agarwala, S. & Ho, G. W. (2009). Synthesis and tuning of ordering and crystallinity of mesoporous titanium dioxide film. Materials Letters, 63(18-19), 1624-1627. https://doi.org/10.1016/j.matlet.2009.04.036

Agarwala, S., Kevin, M., Wong, A. S. W., Peh, C. K. N., Thavasi, V. & Ho, G. W. (2010). Mesophase Ordering of TiO2 Film with High Surface Area and Strong Light Harvesting for Dye-Sensitized Solar Cell. ACS Applied Materials & Interfaces, 2(7), 1844-1850. https://doi.org/10.1021/am100421e

Agarwala, S., Thummalakunta, L. N. S. A., Cook, C. A., Peh, C. K. N., Wong, A. S. W., Ke, L. & Ho, G. W. (2010). Co-existence of LiI and KI in filler-free, quasi-solid-state electrolyte for efficient and stable dye-sensitized solar cell. Journal of Power Sources, 196(3), 1651-1656. https://doi.org/10.1016/j.jpowsour.2010.08.095

Saxena, A. K., Singhal, S., Das Gupta, S. & Agarwala, S. (2011). Effect of impurity compensation on electron mobilities in the multi-conduction bands of GaAs. Journal of Active Passive Electronic Devices, 6(1-2), 39-60.

Agarwala, S., Peh, C. K. N. & Ho, G. W. (2011). Investigation of Ionic Conductivity and Long-Term Stability of a LiI and KI Coupled Diphenylamine Quasi-Solid-State Dye- Sensitized Solar Cell. ACS Applied Materials & Interfaces, 3(7), 2383-2391. https://doi.org/10.1021/am200296f

Zhang, B., Liu, Y., Agarwala, S., Yeh, M.-L. & E. Katz, H. (2011). Structure, sodium ion role, and practical issues for β-alumina as a high-k solution processed gate layer for transparent and low-voltage electronics. ACS Applied Materials & Interfaces, 3(11), 4254-4261. https://doi.org/10.1021/am2009103

Agarwala, S., Lim, Z. H., Nicholsen, E. & Ho, G. W. (2011). Probing Morphology-Device Relation of Fe2O3 Nanostructures towards Photovoltaic and Sensing Applications. Nanoscale, 4, 194-205. https://doi.org/10.1039/C1NR10856E

Agarwala, S. & Ho, G. W. (2011). Self-Ordering Anodized Nanotubes: Enhancing the Performance by Surface Plasmon for Dye-Sensitized Solar Cell. Journal of Solid State Chemistry, 189, 101-107. https://doi.org/10.1016/j.jssc.2011.11.047

Agarwala, S., Ong, W. L. & Ho, G. W. (2013). Tailoring the Porosity of 3D Tin Oxide Nanostructures using Urea for Sensing and Photovoltaic Applications. Science of Advanced Materials, 9, 1418-1426. https://doi.org/10.1166/sam.2013.1604

Sabba, D., Agarwala, S., Pramana, S. S. & G. Mhaisalkar, S. (2014). A maskless synthesis of TiO2-nanofiber based hierarchical structures for solid-state dye-sensitized solar cells with improved performance. Nanoscale Research Letters, 9(14), 14-22. https://doi.org/10.1186/1556-276X-9-14

Boix, P. P., Agarwala, S., Ming Koh, T., Mathews, N. & G. Mhaisalkar, S. (2015). Perovskite Solar Cells: Beyond Methylammnonium lead iodide. The Journal of Physical Chemistry Letters, 6(5), 898-907. https://doi.org/10.1021/jz502547f

Liang Goh, G., Ma, J., Chua, K. L. F., Agarwala, S., Wai Yee, Y. & Ping Zhang, Y. (2016). Inkjet printed patch antenna emitter for wireless communication application. Journal Virtual and Physical Prototyping, 11(4), 289-294. https://doi.org/10.1080/17452759.2016.1229802

Agarwala, S. (2016). A Perspective on 3D Bioprinting Technology: Present and Future. American Journal of Engineering and Applied Sciences, 9(4), 985-990. https://doi.org/10.3844/ajeassp.2016.985.990

Yong Sheng Tan, E., Agarwala, S., Ling Yap, Y., Siang Hui Tan, C., Laude, A. & Wai Yee, Y. (2017). Novel method for fabrication of functional-led, Ultrathin, Free-standing and Nanoporous Polymer Membranes for Retinal Tissue Engineering. Journal of Materials Chemistry B, 5(28), 5616-5622. https://doi.org/10.1039/C7TB00376E

Leong Sing, S., Wang, S., Agarwala, S., Wiria, F. E., Hoa Ha, T. M. & Yeong, W. Y. (2017). Fabrication of titanium based biphasic scaffold using selective laser melting and collagen immersion. International Journal of Bioprinting, 3(1), 65-71. https://doi.org/10.18063/IJB.2017.01.007.

Dong Goh, G., Agarwala, S., Liang Goh, G., Dikshit, V., Sing, S. L. & Yeong, W. Y. (2017). Additive manufacturing in Unmanned Aerial Vehicles (UAV): challenges and potential. Aerospace Science and Technology, 63, 140-151. https://doi.org/10.1016/j.ast.2016.12.019

Agarwala, S., Liang Goh, G., Ling Yap, Y., Dong Goh, G., Yu, H., Wai Yee, Y. & Tran, T. (2017). Development of bendable strain sensor with embedded microchannels using 3D printing. Sensors and Actuators A: Physical, 263, 593-599. https://doi.org/10.1016/j.sna.2017.07.025

Liang Goh, G., Agarwala, S., Dong Goh, G., Kuan Joel Tan, H., Zhao, L., Kuan Chuah, T. & Wai Yee, Y. (2018). Additively Manufactured Multi-material Free-form Structure with Printed Electronics. International Journal of Advanced Manufacturing Technology, 94(1-4), 1309-1316. https://doi.org/10.1007/s00170-017-0972-z

Dong Goh, G., Dikshit, V., Prasanth Nagalingam, A., Liang Goh, G., Agarwala, S., Sing, S. L., Wei, J. & Yeong, W. Y. (2018). Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics, Materials & Design, 137, 79-89. https://doi.org/10.1016/j.matdes.2017.10.021

Agarwala, S., Min Lee, J., Long Ng, W., Layani, M., Wai Yee, Y. & Magdassi, S. (2018). A novel 3D bioprinted flexible and biocompatible hydrogel bioelectronic platform. Biosensors and Bioelectronics, 102, 365-371. https://doi.org/10.1016/j.bios.2017.11.039

Liang Goh, G., Agarwala, S., Jun Tan, Y. & Wai Yee, Y. (2018). A low cost and flexible carbon nanotube pH sensor fabricated using Aerosol jet technology for live cell applications. Sensors and Actuators B: Chemical, 260, 227-235. https://doi.org/10.1016/j.snb.2017.12.127

Agarwala, S., Min Lee, J., Wai Yee, Y. & Layani, M. (2018). 3D printed bioelectronic platform with embedded electronics. MRS Advances, 3(50), 2991-3002. https://doi.org/10.1557/adv.2018.431

Dong Goh, G., Ling Yap, Y., Agarwala, S. & Wai Yee, Y. (2019). Recent progress in Additive Manufacturing of Fiber Reinforced Polymer Composite. Advanced Materials Interfaces, 4(1), Article 1800271. https://doi.org/10.1002/admt.201800271

Liang Goh, G., Agarwala, S. & Wai Yee, Y. (2019). Directed and On-demand Alignment of Carbon Nanotube: A Review Towards 3D Printing of Electronics. Advanced Materials Interfaces, 6(4), Article 1801318. https://doi.org/10.1002/admi.201801318

Agarwala, S., Liang Goh, G., Dinh Le, T.-S., An, J., Kai Peh, Z., Yeong, W. Y. & Kim, Y.-J. (2019). Wearable Bandage based Strain Sensor for Home Healthcare: Combining 3D Aerosol Jet Printing and Laser Sintering. ACS Sensors, 4(1), 218-226. https://doi.org/10.1021/acssensors.8b01293

Dikshit, V., Prasanth Nagalingam, A., Dong Goh, G., Agarwala, S., Wai Yee, Y. & Wei, J. (2021). Quasi-Static Indentation Analysis on Three-Dimensional Printed Continuous-Fiber Sandwich Composites. Journal of Sandwich Structures & Materials, 23(2), 385-404. https://doi.org/10.1177/1099636219836058

Agarwala, S. & Ho, G. W. (2010). Mesoporous TiO2 film for solar cell application. In C. Soo-Jin, A. Danner & T. Jinghua (Eds.), Compound semiconductor photonics: materials, devices and integration (1 ed.). Jenny Stanford Publishing.

Agarwala, S. & Ho, G. W. (2013). Quasi-3D Architecture for Iron Oxide and Its Influence on Solar Cell Performance. In M. Aliofkhazraei (Ed.), Handbook of Functional Nanomaterials: Volume 1 -- Synthesis & Modification (Vol. 1, pp. 37-48). Nova Science Publishers, Inc.

Knudsen, M. B., Kæseler, S. A. & Rohde, J. (2019). LoRaWAN End-Device Antenna Performance. In CEMi 2018 - International Workshop on Computing, Electromagnetics, and Machine Intelligence (pp. 77-78). Article 8610536 IEEE. https://doi.org/10.1109/CEMI.2018.8610536

Bagheriye, L., Toofan, S., Saeidi, R. & Moradi, F. (2019). Highly stable, low power FinFET SRAM cells with exploiting dynamic back-gate biasing. Integration, 65, 128-137. https://doi.org/10.1016/j.vlsi.2018.11.011

Klarskov, P., Pizzuto, A. & Mittleman, D. M. (2018). Imaging on the Nanoscale with THz Time-Domain, Emission and Pump-Probe Microscopy: 2018 43rd International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz). 1-2. https://doi.org/10.1109/IRMMW-THz.2018.8509949

Klarskov, P., Pizzuto, A. & Mittleman, D. M. (2018). Imaging on the Nanoscale with THz Time-Domain, Emission and Pump-Probe Microscopy. In 2018 43rd International Conference on Infrared Millimeter and Terahertz Waves, IRMMW-THz 2018 Article 8509949 https://doi.org/10.1109/irmmw-thz.2018.8509949

Pizzuto, A., Klarskov, P. & Mittleman, D. M. (2018). Laser Terahertz Emission Nanoscopy. In 2018 Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2018 Article Tu3C.2 https://doi.org/10.1364/cleopr.2018.tu3c.2

Klarskov, P., Tarekegne, A. T., Iwaszczuk, K., Zhang, X.-C. & Jepsen, P. U. (2016). Amplification of resonant field enhancement by plasmonic lattice coupling in metallic slit arrays. Scientific Reports, 6, Article 37738. https://doi.org/10.1038/srep37738

Klarskov, P., Kim, H., Colvin, V. L. & Mittleman, D. M. (2017). Imaging single nanoparticles using laser terahertz emission nanoscopy. In 2017 42nd International Conference on Infrared, Millimeter, and Terahertz Waves, IRMMW-THz 2017 Article 8067202 https://doi.org/10.1109/irmmw-thz.2017.8067202

Pedersen, P. K., Pizzuto, A. & Mittleman, D. M. (2018). Imaging on the Nanoscale with Terahertz Time-Domain and Emission Microscopy. In International Symposium on Ultrafast Phenomena and Terahertz Waves, ISUPTW 2018 Article ThB3 https://doi.org/10.1364/isuptw.2018.thb3

Klarskov, P. & Mittleman, D. M. (2016). Laser terahertz emission microscopy with near-field probes. In 41st International Conference on Infrared, Millimeter and Terahertz Waves, IRMMW-THz 2016 Article 7758721 https://doi.org/10.1109/irmmw-thz.2016.7758721

Klarskov, P., Kim, H., Colvin, V. & Mittleman, D. M. (2017). Nanoscale Terahertz Emission Spectroscopy. In Advanced Photonics, Sensors 2017 https://doi.org/10.1364/sensors.2017.seth1e.4

Klarskov, P., Kim, H., Colvin, V. L. & Mittleman, D. M. (2017). Nanoscale Laser Terahertz Emission Microscopy. ACS Photonics, 4(11), 2676-2680. https://doi.org/10.1021/acsphotonics.7b00870

Pizzuto, A., Klarskov, P. & Mittleman, D. M. (2018). Bias Dependence of Laser Terahertz Emission Nanoscopy. In CLEO: Applications and Technology, CLEO_AT 2018 Article JM1A.3 https://doi.org/10.1364/cleo_at.2018.jm1a.3

Slavensky, H. & Lysgaard, P. (2018). A quantitative and qualitative analysis of online student retention. In EDULEARN18 Proceedings: 10th International Conference on Education and New Learning Technologies (pp. 2443-2450). International Association of Technology, Education and Development (IATED). https://doi.org/10.21125/edulearn.2018.0664

Akbari, M., Hashemipour, O., Khateb, F. & Moradi, F. (2018). An Energy-Efficient DAC Switching Algorithm Based on Charge Recycling Method for SAR ADCs. Microelectronics Journal, 82, 29-35. https://doi.org/10.1016/j.mejo.2018.10.011

Zeinali, B. & Moradi, F. (2019). Sensing of spintronic memories. In S. Ghosh (Ed.), Sensing of Non-Volatile Memory Demystified (pp. 1-30). Springer. https://doi.org/10.1007/978-3-319-97347-0

Tohidi, M., Madsen, J. K. & Moradi, F. (2018). Low-Power, Low-Noise Epileptic-Seizure Detection System with High Accuracy Using EEG Signals. Poster session presented at Biomedical Circuits and Systems Conference, Cleveland, United States. https://www.epapers.org/biocas2018/ESR/paper_details.php?PHPSESSID=ok076vdjtkiu7kett65d8hk0g0&paper_id=6066

Displaying results 251 to 300 out of 378

6

Back to the main page

Revised 10.08.2023

-

AU Engineering