Publications by Electronics & Photonics

Are you looking for publications by Section of Electronics & Photonics? On this page you can find all the publications made by the Section of Electronics & Photonics - Department of Electrical and Computer Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and titles. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Agarwala, S. (2016). A Perspective on 3D Bioprinting Technology: Present and Future. American Journal of Engineering and Applied Sciences, 9(4), 985-990. https://doi.org/10.3844/ajeassp.2016.985.990

Zhou, X., Li, Q., Kilsgaard, S., Moradi, F., Kappel, S. & Kidmose, P. (2016). A Wearable Ear-EEG Recording System Based on Dry-Contact Active Electrodes. In 2016 IEEE Symposium on VLSI Circuits, VLSI Circuits 2016: VLSI Circuits 2016 (Vol. 2016). Article 7573559 IEEE Press. https://doi.org/10.1109/VLSIC.2016.7573559

Davidsen, R. S., Li, H., To, A., Wang, X., Han, A., An, J., Colwell, J., Chan, C., Wenham, A., Stenbæk Schmidt, M., Boisen, A., Hansen, O., Wenham, S. & Barnett, A. (2016). Black silicon laser-doped selective emitter solar cell with 18.1% efficiency. Solar Energy Materials & Solar Cells, 144(740-747), 740-747. https://doi.org/10.1016/j.solmat.2015.10.018

Lehmann, A. & Gross, A. (2016). Effect of GPS errors on Emission model. Paper presented at Global Wireless Summit 2016, Aarhus, Denmark.

Wang, S., Leong Sing, S., Agarwala, S. & Wai Yee, Y. (2016). Fabrication of titanium lattice structures by selective laser melting for osteochondral tissue regeneration. In 2nd International Conference on Progress in Additive Manufacturing (Vol. Part F129095, pp. 380-384). Research Publishing, Singapore.

Varghani, A., Peiravi, A. & Moradi, F. (2016). Graphene-Based STT-RAM Cell with Improved Switching for Scaled Technology Nodes. I E E E Transactions on Magnetics, 52(1), Article 1600108. https://doi.org/10.1109/TMAG.2015.2473135

Klarskov, P. & Mittleman, D. M. (2016). Laser terahertz emission microscopy with near-field probes. In 41st International Conference on Infrared, Millimeter and Terahertz Waves, IRMMW-THz 2016 Article 7758721 https://doi.org/10.1109/irmmw-thz.2016.7758721

Lundager, K., Zeinali, B., Tohidi, M., Madsen, J. K. & Moradi, F. (2016). Low Power Design for Future Wearable and Implantable Devices. Journal of Low Power Electronics and Applications, 6(4), Article 20. https://doi.org/10.3390/jlpea6040020

Dikshit, V., Prasanth Nagalingam, A., Kumar, J. D., Yap, Y. L., Agarwala, S. & Wai Yee, Y. (2016). Out of plane compressive strength of 3D printed vertical pillared corrugated core structure. In Proceedings of the 2nd International Conference on Progress in Additive Manufacturin (Vol. Part F129095, pp. 128-133). Research Publishing, Singapore.

Kharghanian, R., Peiravi, A. & Moradi, F. (2016). Pain detection from facial image using unsupervised feature learning approach. Proceedings of the International Conference of the IEEE Engineering in Medicine and Biology Society , 2016, 419-422. https://doi.org/10.1109/EMBC.2016.7590729

Lehmann, A. & Gross, A. (2016). Using Crowd Sensed Data as Input to Congestion Model. In 2016 IEEE International Conference on Pervasive Computing and Communication Workshops, PerCom Workshops 2016: The Third International Workshop on Crowd Assisted Sensing Pervasive Systems and Communications Article 7457105 IEEE Press. https://doi.org/10.1109/PERCOMW.2016.7457105

Moradi, F., Tohidi, M., Zeinali, B. & Madsen, J. K. (2015). 8T-SRAM Cell with Improved Read and Write Margins in 65 nm CMOS Technology. In L. Claesen, M.-T. Sanz-Pascual, R. Reis & A. Sarmiento-Reyes (Eds.), VLSI-SoC: Internet of Things Foundations: 22nd IFIP WG 10.5/IEEE International Conference on Very Large Scale Integration, VLSI-SoC 2014, Playa del Carmen, Mexico, October 6–8, 2014, Revised and Extended Selected Papers (Vol. 464, pp. 95-109). Springer. https://doi.org/10.1007/978-3-319-25279-7_6

Moradi, F. & Tohidi, M. (2015). Low-Voltage 9T FinFETSRAM Cell for Low-Power Applications. In Proceedings of the 28th IEEE International System on Chip Conference (SOCC) (pp. 149-153). IEEE. https://doi.org/10.1109/SOCC.2015.7406929

Zeinali, B., Madsen, J. K., Raghavan, P. & Moradi, F. (2015). Sub-Threshold SRAM Design in 14Nm FinFET Technology with Improved Access Time and Leakage Power. In Proceedings of the IEEE Computer Society Annual Symposium on VLSI (ISVLSI) (Vol. 2015, pp. 74-79). IEEE. https://doi.org/10.1109/ISVLSI.2015.73

Glavind, L., Buggy, S., Skipper, B. F., Canning, J., Gao, S., Cook, K., Luo, Y., Peng, G.-D. & Kristensen, M. (2014). A Long-Period Grating Sensor System Monitoring Loads on a Wind Turbine Blade. In Advanced Photonics (pp. BM3D.4). Optical Society of America. https://doi.org/10.1364/BGPP.2014.BM3D.4

Farkhani, H., Peiravi, A. & Moradi, F. (2014). A new asymmetric 6T SRAM cell with a write assist technique in 65 nm CMOS technology. Microelectronics Journal, 45(11), 1556-1565. https://doi.org/10.1016/j.mejo.2014.09.006

Farkhani, H., Peiravi, A., Madsen, J. K. & Moradi, F. (2014). Comparative study of FinFETs versus 22nm bulk CMOS technologies: SRAM design perspective. In 27th IEEE International System on Chip Conference: SOCC 2014 (pp. 449-454). Article 6948971 IEEE Computer Society Press. https://doi.org/10.1109/SOCC.2014.6948971

Glavind, L., Canning, J., Gao, S., Cook, K., Peng, G.-D., Luo, Y., Skipper, B. F. & Kristensen, M. (2014). D-shape fiber with Mach Zehnder Long-Period Gratings for a High Resolution and Selective Sensor. In Advanced Photonics (pp. BM4D.3). Optical Society of America. https://doi.org/10.1364/BGPP.2014.BM4D.3

Moradi, F. & Madsen, J. K. (2014). Improved read and write margins using a novel 8T-SRAM cell. In L. Garcia (Ed.), 2014 22nd International Conference on Very Large Scale Integration (VLSI-SoC): Conference Proceedings (pp. 1-5). IEEE. https://doi.org/10.1109/VLSI-SoC.2014.7004186

Glavind, L., Buggy, S., Canning, J., Gao, S., Cook, K., Luo, Y., Peng, G. D., Skipper, B. F. & Kristensen, M. (2014). Long-period gratings for selective monitoring of loads on a wind turbine blade. Applied Optics, 53(18), 3993-4001. https://doi.org/10.1364/AO.53.003993

Glavind, L., Canning, J., Gao, S., Cook, K., Peng, G.-D., Luo, Y., Skipper, B. F. & Kristensen, M. (2014). Long-period gratings in special geometry fibers for high-resolution and selective sensors. Optical Engineering, 53(6), 066109. https://doi.org/10.1117/1.OE.53.6.066109

Moradi, F. & Madsen, J. K. (2014). Robust subthreshold 7T-SRAM cell for low-power applications. Midwest Symposium on Circuits and Systems. Conference Proceedings, 893-896. Article 6908559. https://doi.org/10.1109/MWSCAS.2014.6908559

Glavind, L., Buggy, S., Olesen, I. S., Skipper, B. F., Canning, J., Cook, K. & Kristensen, M. (2013). Direct Embedding of Fiber-Optical Load Sensors into Wind Turbine Blades. Abstract from OSA Conference on Optical Sensors, Rio Grande, Puerto Rico, United States. https://doi.org/10.1364/SENSORS.2013.SM3C.6

Moradi, F., Vu Cao, T., Vatajelu, E. I., Peiravi, A., Mahmoodi, H. & Wisland, D. (2013). Domino logic designs for high-performance and leakage-tolerant applications. Integration, 46(3), 247–254. https://doi.org/10.1016/j.vlsi.2012.04.005

Glavind, L., Gao, S., Cook, K., Canning, J., Skipper, BF., Luo, Y., Peng, G. & Kristensen, M. (2013). Enhanced resolution of long-period grating bend sensor. Proceedings of S P I E - International Society for Optical Engineering, 8924, 892437-892437. https://doi.org/10.1117/12.2031353

Glavind, L., Olesen, I. S., Skipper, B. F. & Kristensen, M. (2013). Fiber-optical grating sensors for wind turbine blades: a review. Optical Engineering, 52(3), 030901. https://doi.org/10.1117/1.OE.52.3.030901

Rohde, J. (2013). Low-power tri-band receiver front-end for wireless home automation applications. Aarhus University, Department of Engineering.

Agarwala, S. & Ho, G. W. (2013). Quasi-3D Architecture for Iron Oxide and Its Influence on Solar Cell Performance. In M. Aliofkhazraei (Ed.), Handbook of Functional Nanomaterials: Volume 1 -- Synthesis & Modification (Vol. 1, pp. 37-48). Nova Science Publishers, Inc.

Agarwala, S., Ong, W. L. & Ho, G. W. (2013). Tailoring the Porosity of 3D Tin Oxide Nanostructures using Urea for Sensing and Photovoltaic Applications. Science of Advanced Materials, 9, 1418-1426. https://doi.org/10.1166/sam.2013.1604

Moradi, F. (2012). Datapath design using asymmetrically-doped FinFET. Midwest Symposium on Circuits and Systems. Conference Proceedings, 21-24. https://doi.org/10.1109/MWSCAS.2012.6291947

Rohde, J. & Toftegaard, T. S. (2012). Facilitating Performance Optimization of RF PCB Designs by using Parametric Finite-Element Component Models. In S. Al Zahir, M. H. Hamza & J. Cheng (Eds.), Visualization, Imaging and Image Processing / 783: Modelling and Simulation / 784: Wireless Communications (Vol. 783). ACTA Press. https://doi.org/10.2316/P.2012.783-037

Laustsen, C., Slavensky, H., Schmidt, I. & Lysgaard, P. (2012). Flere studerende – bedre uddannelse. Dansk Universitetspædagogisk Tidsskrift, (12), 79-90.

Moradi, F., Wisland, D., Madsen, J. K. & Mahmoodi, H. (2012). Flip-Flop Design Using Novel Pulse Generation Technique. Paper presented at IEEE International Conference on Electronics, Circuits, and Systems, Sevilla, Spain. http://www.ieee-icecs2012.org/index.php

Cao, T.-V., Wisland, D. T., Lande, T. S. & Moradi, F. (2012). Low phase-noise VCO utilizing modified symmetric load and partial positive feedback for FDSM. Analog Integrated Circuits and Signal Processing, 73(1), 151-160. https://doi.org/10.1007/s10470-011-9803-6

Moradi, F. (2012). Novel FinFET Device Using Asymmetric Doping. In 8th European Workshop on Silicon on Insulator Technology, Devices and Circuits: EuroSOI 2012 (pp. 91-92)

Reetz, E., Lehmann, A., Kümper, D. & Tönjes, R. (2012). Test Driven Life Cycle Management for Internet of Things based Services: a Semantic Approach. Paper presented at International Conference on Advances in System Testing and Validation Lifecycle, Lisbon, Portugal.

Rohde, J. & Toftegaard, T. S. (2012). Tri-Band PCB Antenna for Wireless Sensor Network Transceivers in Home Automation Applications. In S. Al Zahir, M. H. Hamza & J. Cheng (Eds.), Visualization, Imaging and Image Processing / 783: Modelling and Simulation / 784: Wireless Communications (Vol. 784). ACTA Press. https://doi.org/10.2316/P.2012.784-033

Rohde, J. & Toftegaard, T. S. (2011). Adaption of Cognitive Radio technology to low-cost and low-power wireless Personal Area Network devices. Wireless Personal Communications, 58(1), 111-123. https://doi.org/10.1007/s11277-011-0291-x

Moradi, F., Gupta, S. K., Panagopoulos, G., Wisland, D., Mahmoodi, H. & Roy, K. (2011). Asymmetrically Doped FinFETs for Low-Power Robust SRAMs. I E E E Transactions on Electron Devices, 58(12), 4241 - 4249. https://doi.org/10.1109/TED.2011.2169678

Saxena, A. K., Singhal, S., Das Gupta, S. & Agarwala, S. (2011). Effect of impurity compensation on electron mobilities in the multi-conduction bands of GaAs. Journal of Active Passive Electronic Devices, 6(1-2), 39-60.

Rohde, J. & Toftegaard, T. S. (2011). Mitigating the impact of high interference levels on energy consumption in wireless sensor networks. In 2nd International Conference on Wireless Communication, Vehicular Technology, Information Theory and Aerospace and Electronic Systems Technology, Wireless VITAE 2011 https://doi.org/10.1109/WIRELESSVITAE.2011.5940899

Moradi, F., Wisland, D., Panagopoulos, G., Roy, K., Karakonstantis, G., Mahmoodi, H. & Madsen, J. K. (2011). Multi-level wordline driver for low power SRAMs in nano-scale CMOS technology. In Proceedings - IEEE International Conference on Computer Design: VLSI in Computers and Processors (pp. 326-331) https://doi.org/10.1109/ICCD.2011.6081419

Moradi, F., Cao, T. V., Wisland, D. T., Aunet, S. & Mahmoodi, H. (2011). Optimal body biasing for maximizing circuit performance in 65nm CMOS technology. In Midwest Symposium on Circuits and Systems (pp. 4) https://doi.org/10.1109/MWSCAS.2011.6026651

Agarwala, S. & Ho, G. W. (2010). Mesoporous TiO2 film for solar cell application. In C. Soo-Jin, A. Danner & T. Jinghua (Eds.), Compound semiconductor photonics: materials, devices and integration (1 ed.). Jenny Stanford Publishing.

Wolff, S., Rohde, J., Toftegaard, T. S., Larsen, P. G., Lausdahl, K. G., Ribeiro, A. & Stender, M. H. (2010). Optimizing Energy Usage in Private Households. In R. Prasad, S. Ohmori & D. Šimunić (Eds.), Towards Green ICT (pp. 185-210). River Pulishers.

Lehmann, A. (2009). Simulation of channel characteristics for complex networks. Paper presented at Third Workshop on Power Line Communications, Udine, Italy.

Rohde, J., Wolff, S. & Toftegaard, T. S. (2009). Strategies For Releasing The Green Potential In Home Automation. Proceedings of the Wireless Personal Multimedia Communications Symposia.

Slavensky, H., Jensen, B. & Kjærsgaard, S. (2007). Powerline Equipment for AV Streaming Applications. Paper presented at ISPLC 06, Boston, United States.

Kolle, K., Lysgaard, P., Bejder, K., Nørskov, H., Slavensky, H., Olsen, M., Jensen, B., Jakobsen, S. & Formsgaard, A. (2004). Embedded Unified Development Process - EUDP. (0.9.113 ed.).

Agarwala, S. (2004). Microstructural features associated with Carbon nanotubes produced by catalytic chemical decomposition. In Electron microscope society of India

Displaying results 201 to 250 out of 252

Back to the main page

Revised 10.08.2023

AU Engineering