Department of Electrical and Computer Engineering

Aarhus University Seal
 Department of Electrical and Computer Engineering About the department Laboratories and workshops Katrinebjerg MakerLab MakerLab Pro

MakerLab Pro

Info about the laboratory

Room nr. 5122-135, Katrinebjerg

MakerLab Pro is intended for 3D printing of demanding items that cannot be printed in the open MakerLab.

Below you will find an overview of the printers available in the laboratory, as well as information about their benefits.

Orders for 3D printing

Access to the laboratory is reserved for MakerLab Pilots and employees at ECE.

If students need to print items in MakerLab Pro, this will be done by making an order to the MakerLab Pilots.

FDM Printers

Ultimaker S5

  • Construction volume: 330 x 240 x 300 mm
  • Dual nozzle = 2+ simultane materials
  • Slice Thickness: 0.02 -> 0.3 mm
  • Materials: PLA, PVA, CPE, TPU

Raise 3D Pro2 Plus

  • Construction volume: 305 x 305 x 605 mm
  • Large-scale printer
  • Dual nozzle, i.e. 2 simultaneous materials
  • Slice Thickness: 0.05 -> 0.3 mm
  • Materials: PLA, PETG, TPU

Creality CR30

  • Construction volume: 200 x 170 x ∞ mm
  • Prints on a conveyor belt and can therefore print infinitely far
  • Slice Thickness: 0.05 -> 0.3 mm
  • Materials: PLA, PETG, TPU

Ultimaker 3 Extended

  • Construction volume: 197 x 215 x 300 mm
  • Dual nozzle = 2 simultaneous materials
  • Slice Thickness: 0.05 -> 0.3 mm
  • Materials: PLA, PETG, TPU, PVA

Resin printers

Formlabs Form3B SLA printer

  • Construction volume: 145 x 145 x 185 mm
  • SLA = High resolution prints
  • Slice Thickness: 0.025 -> 0.3 mm
  • Materials: Clear, Tough, Flexible

Prusa SL1S SPEED

  • Construction volume: 127 x 80 x 150 mm
  • DLP = High resolution prints
  • Slice Thickness:0.025 -> 0.1 mm
  • Materials: Different colours resin

Anycubic Photon M3 MAX

  • Construction volume: 475 x 290 x 360 mm
  • DLP = High resolution prints
  • Slice Thickness: 0.010 -> 0.2 mm
  • Materials: Different colours of resin

Anycubic Photon M3 MAX

  • Construction volume: 475 x 290 x 360 mm
  • DLP = High resolution prints
  • Slice Thickness: 0.010 -> 0.2 mm
  • Materials: Different colours of resin

Location

Finlandsgade 20, 8200 Aarhus N

  • Building 5122
  • Room 135

Contact the Pilots of MakerLab

makerlab.ece@gmail.com

Marie Damgaard Asmussen
Marie Damgaard Asmussen
Simon Devantier
Simon Devantier
Andreas Mandøe
Andreas Mandøe
Kasper Skovmose
Kasper Skovmose

Contact Laboratory Manager

Samuel Alberg Thrysøe

Associate Professor
M
H 5125, 326
P +4541893236

Rasmus Rolighed Christensen

Electrician
M
H 5122
P +4593521032
Revised 17.06.2024
-
Kontakt AU Engineering