Find

For students
For PhDs
For employees

Department of Electrical and Computer Engineering

Publications

Sort by: Date | Author | Title

Anand, M., Panigrahi, S., Kofoed, M. V. W., Aghababaei, R. & Agarwala, S. (2024). Bioinspired poly(vinyl alcohol) films with tunable adhesion and self-healing for biodegradable electronics and beyond. Sustainable Materials and Technologies, 41, Article e01084. https://doi.org/10.1016/j.susmat.2024.e01084

Merhi, Y., Agarwala, S., Mantysalo, M., Lozano Montero, K. & Johansen, P. (2024). Evaluating Piezoelectric Performance of Biodegradable PLLA Film and Its Application for Aortic Annuloplasty.

Merhi, Y., Agarwala, S., Goumarre, V. O. Y., Lozano Montero, K., Mantysalo, M., Klarskov, P. & Amarasinghe, Y. (2024). THz Spectroscopy Analysis of Crystallinity Optimization for Enhanced Piezoelectricity in Biodegradable Poly-L-Lactide Acid. In IEEE FLEPS 2024: Conference Proceedings (pp. 1-4). IEEE. https://doi.org/10.1109/FLEPS61194.2024.10604083

Merhi, Y., Klarskov, P., Amarasinghe, Y., Agarwala, S. & Goumarre, V. O. Y. (2024). Tunable Piezoelectric Enhancement in Biodegradable Poly (L-Lactide Acid) (PLLA) Films: Insights from Thermal-Strain Engineering and Terahertz Time-Domain Spectroscopic (THz-TDS) Analysis.

Abdolmaleki, H., Haugen, A. B., Merhi, Y., Nygaard, J. V. & Agarwala, S. (2023). Inkjet-printed flexible piezoelectric sensor for self-powered biomedical monitoring. Materials Today Electronics, 5, Article 100056. https://doi.org/10.1016/j.mtelec.2023.100056

Abdolmaleki, H., Astri Bjørnetun Haugen, A., Buhl, K. B., Daasbjerg, K. & Agarwala, S. (2023). Interfacial Engineering of PVDF‐TrFE toward Higher Piezoelectric, Ferroelectric, and Dielectric Performance for Sensing and Energy Harvesting Applications. Advanced Science, 10(6), Article 2205942. https://doi.org/10.1002/advs.202205942

Klein-Hitpass, A., Kidmose, P. & Agarwala, S. (2023). Direct-write shielded cables for improved signal integrity. IEEE Journal on Flexible Electronics, 2(6). https://doi.org/10.1109/JFLEX.2023.3294147

Merhi, Y., Betancur, P. F., Ripolles, T. S., Suetta, C., Brage-Andersen, M. R., Hansen, S. K., Frydenlund, A., Nygaard, J. V., Mikkelsen, P. H., Boix, P. P. & Agarwala, S. (2023). Printed dry electrode for neuromuscular electrical stimulation (NMES) for e-textile. Nanoscale, 15(11), 5337-5344. https://doi.org/10.1039/d2nr06008f

Ramakrishna, S., Li, F., Kijeńska-Gawrońska, E. & Agarwala, S. (2023). Where is science heading? The main challenges before today’s scientists? Drying Technology, 41(6), 812-816. https://doi.org/10.1080/07373937.2023.2205799

Iversen, M., Monisha, M. & Agarwala, S. (2022). Flexible, Wearable and Fully-printed Smart Patch for pH and Hydration Sensing in Wounds. International Journal of Bioprinting, 8(1), 41-49. https://doi.org/10.18063/IJB.V8I1.447

Krysiak, Z. J., Abdolmaleki, H., Agarwala, S. & Stachewicz, U. (2022). Inkjet Printing of Electrodes on Electrospun Micro- and Nanofiber Hydrophobic Membranes for Flexible and Smart Textile Applications. Polymers, 14(22), Article 5043. https://doi.org/10.3390/polym14225043

Merhi, Y. & Agarwala, S. (2022). Fabrication of flexible, and bioresorbable poly-l-lactide acid piezoelectric material with tunable properties. Materials Today: Proceedings, 70, 531-534. https://doi.org/10.1016/j.matpr.2022.09.553

Monisha, M. & Agarwala, S. (2022). Biodegradable materials: Foundation of transient and sustainable electronics. Materials Science in Additive Manufacturing, 1(3), Article 15. https://doi.org/10.18063/msam.v1i3.15

Abdolmaleki, H., Kidmose, P. & Agarwala, S. (2021). Droplet‐Based Techniques for Printing of Functional Inks for Flexible Physical Sensors. Advanced Materials, 33(20), Article 2006792. https://doi.org/10.1002/adma.202006792

Agarwala, S. (2021). Transactions on Additive Manufacturing Meets Medicine. Transactions on Additive Manufacturing Meets Medicine , 3(S1). https://www.journals.infinite-science.de/index.php/ammm/article/view/595

Frydenlund, A., Poggi, A. I., Hansen, S. K., Brage-Andersen, M., Merhi, Y., Agarwala, S., Mikkelsen, P. H., Nygaard, J. V., Steffensen, I. E. & Suetta, C. (2021). Elektrisk stimulation mod muskel- og funktionstab hos en patient indlagt med COVID-19. Ugeskrift for Læger, 183(20), Article V03210275. https://ugeskriftet.dk/files/scientific_article_files/2021-05/v03210275_web.pdf

Frydenlund, A., Poggi, A. I., Hansen, S. K., Brage-Andersen, M., Merhi, Y., Agarwala, S., Mikkelsen, P. H., Nygaard, J. V., Steffensen, I. E. & Suetta, C. (2021). Elektrisk stimulation mod muskel- og funktionstab hos en patient indlagt med COVID-19. Ugeskrift for Læger, 183(14), 1-4.

Merhi, Y. & Agarwala, S. (2021). Direct write of Dry electrodes on Healthcare Textiles. In FLEPS 2021 - IEEE International Conference on Flexible and Printable Sensors and Systems Article 9469835 IEEE. https://doi.org/10.1109/FLEPS51544.2021.9469835

Abdolmaleki, H. & Agarwala, S. (2020). PVDF-BaTiO3 Nanocomposite Inkjet Inks with Enhanced β-Phase Crystallinity for Printed Electronics. Polymers, 12(10), 1-12. Article 2430. https://doi.org/10.3390/polym12102430

Agarwala, S. & Yeong, W. E. (2020). Aerosol jet fabricated biodegradable antenna for bioelectronics application. In T. M. Buzug & H. Seitz (Eds.), Transactions of the International Scientific Conference on 3D Printing in Medicine Infinite Science. https://doi.org/10.18416/AMMM.2019.1909S02T02

Agarwala, S. (2020). Electrically conducting hydrogels for health care: Concept, fabrication methods, and applications. International Journal of Bioprinting, 6(2), 1-15. Article 273. https://doi.org/10.18063/ijb.v6i2.273

Agarwala, S. (2020). World of opportunities with printed electronics in Denmark. In J. Bruun (Ed.), Profile 2020 (pp. 44-47). Aarhus Universitet, Institut for Ingeniørvidenskab . http://www.e-pages.dk/aarhusuniversitet/2231/html5/

Ferrand, H. L., Chabi, S. & Agarwala, S. (2020). 3D Assembly of Graphene Nanomaterials for Advanced Electronics. Advanced Intelligent Systems , 2(5), Article 1900151. https://doi.org/10.1002/aisy.201900151

Merhi, Y., Mikkelsen, P. H., Suetta, C., Nygaard, J. V. & Agarwala, S. (2020). Mechanical performance of electronically functional smart textiles. In T. M. Buzug & H. Seitz (Eds.), Transactions on additive manufacturing meets medicine Infinite Science. https://doi.org/10.18416/AMMM.2020.2009012

Victoria, M., Klarskov, P., Agarwala, S., Hjorth, M., Zhang, Q. & Kara, S. (2020). How do we get more women in academia? In J. Bruun (Ed.), Profile 2020 (pp. 16-19). Aarhus Universitet, Institut for Ingeniørvidenskab . http://www.e-pages.dk/aarhusuniversitet/2231/html5/

Agarwala, S., Liang Goh, G., Dong Goh, G., Dikshit, V. & Wai Yee, Y. (2019). Chapter 10 - 3D and 4D printing of polymer/CNTs-based conductive composites. In K. K. Sadasivuni, K. Deshmukh & M. AlAli AlMaadeed (Eds.), 3D and 4D Printing of Polymer Nanocomposite Materials: Processes, Applications, and Challenges (pp. 297-324). Elsevier. https://www.elsevier.com/books/3d-and-4d-printing-of-polymer-nanocomposite-materials/sadasivuni/978-0-12-816805-9

Agarwala, S. (2019). Enabling new possibilities in smart textiles through printed electronics. In 2019 IEEE 9th International Nanoelectronics Conferences, INEC 2019 Article 8853853 IEEE. https://doi.org/10.1109/INEC.2019.8853853

Dikshit, V., Prasanth Nagalingam, A., Dong Goh, G., Agarwala, S., Wai Yee, Y. & Wei, J. (2019). Quasi-Static Indentation Analysis on Three-Dimensional Printed Continuous-Fiber Sandwich Composites. Journal of Sandwich Structures & Materials, 23(2), 385-404. https://doi.org/10.1177/1099636219836058

Goh, G. L., Agarwala, S. & Yeong, W. Y. (2019). Aerosol-Jet-Printed Preferentially Aligned Carbon Nanotube Twin-Lines for Printed Electronics. ACS Applied Materials & Interfaces, 11(46), 43719-43730. https://doi.org/10.1021/acsami.9b15060

Goh, G. L., Saengchairat, N., Agarwala, S., Yeong, W. Y. & Tran, T. (2019). Sessile droplets containing carbon nanotubes: A study of evaporation dynamics and CNT alignment for printed electronics. Nanoscale, 11(22), 10603-10614. https://doi.org/10.1039/c9nr03261d

Liang Goh, G., Agarwala, S. & Wai Yee, Y. (2019). Directed and On-demand Alignment of Carbon Nanotube: A Review Towards 3D Printing of Electronics. Advanced Materials Interfaces, 6(4), Article 1801318. https://doi.org/10.1002/admi.201801318

Agarwala, S., Min Lee, J., Wai Yee, Y. & Layani, M. (2018). 3D printed bioelectronic platform with embedded electronics. MRS Advances, 3(50), 2991-3002. https://doi.org/10.1557/adv.2018.431

Agarwala, S., Liang Goh, G. & Wai Yee, Y. (2018). Aerosol jet printed pH sensor based on carbon nanotubes for flexible electronics. In Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018) (Vol. 2018-May, pp. 88-94) https://doi.org/10.25341/D4Q59F

Agarwala, S., Liang Goh, G. & Wai Yee, Y. (2018). High resolution of aerosol jet printing of conducting ink for stretchable electronics. In Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018 (Vol. 2018-May, pp. 109-114) https://doi.org/10.25341/D4FS3W

Agarwala, S., Liang Goh, G., Dinh Le, T.-S., An, J., Kai Peh, Z., Yeong, W. Y. & Kim, Y.-J. (2018). Wearable Bandage based Strain Sensor for Home Healthcare: Combining 3D Aerosol Jet Printing and Laser Sintering. ACS Sensors, 4(1), 218-226. https://doi.org/10.1021/acssensors.8b01293

Dong Goh, G., Ling Yap, Y., Agarwala, S. & Wai Yee, Y. (2018). Recent progress in Additive Manufacturing of Fiber Reinforced Polymer Composite. Advanced Materials Interfaces, 4(1), Article 1800271. https://doi.org/10.1002/admt.201800271

Agarwala, S., Min Lee, J., Long Ng, W., Layani, M., Wai Yee, Y. & Magdassi, S. (2017). A novel 3D bioprinted flexible and biocompatible hydrogel bioelectronic platform. Biosensors and Bioelectronics, 102, 365-371. https://doi.org/10.1016/j.bios.2017.11.039

Agarwala, S., Liang Goh, G., Ling Yap, Y., Dong Goh, G., Yu, H., Wai Yee, Y. & Tran, T. (2017). Development of bendable strain sensor with embedded microchannels using 3D printing. Sensors and Actuators A: Physical, 263, 593-599. https://doi.org/10.1016/j.sna.2017.07.025

Agarwala, S., Liang Goh, G. & Wai Yee, Y. (2017). Optimizing aerosol jet printing process of silver ink for printed electronics. In IOP Conf. Series: Materials Science and Engineering : 2nd International Conference on Mining, Material and Metallurgical Engineering (Vol. 191). IOP Publishing. https://doi.org/10.1088/1757-899X/191/1/012027

Dong Goh, G., Dikshit, V., Prasanth Nagalingam, A., Liang Goh, G., Agarwala, S., Sing, S. L., Wei, J. & Yeong, W. Y. (2017). Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics, Materials & Design, 137, 79-89. https://doi.org/10.1016/j.matdes.2017.10.021

Leong Sing, S., Wang, S., Agarwala, S., Wiria, F. E., Hoa Ha, T. M. & Yeong, W. Y. (2017). Fabrication of titanium based biphasic scaffold using selective laser melting and collagen immersion. International Journal of Bioprinting, 3(1), 65-71. https://doi.org/10.18063/IJB.2017.01.007.

Liang Goh, G., Agarwala, S., Dong Goh, G., Kuan Joel Tan, H., Zhao, L., Kuan Chuah, T. & Wai Yee, Y. (2017). Additively Manufactured Multi-material Free-form Structure with Printed Electronics. International Journal of Advanced Manufacturing Technology, 94(1-4), 1309-1316. https://doi.org/10.1007/s00170-017-0972-z

Liang Goh, G., Agarwala, S., Jun Tan, Y. & Wai Yee, Y. (2017). A low cost and flexible carbon nanotube pH sensor fabricated using Aerosol jet technology for live cell applications. Sensors and Actuators B: Chemical, 260, 227-235. https://doi.org/10.1016/j.snb.2017.12.127

Yong Sheng Tan, E., Agarwala, S., Ling Yap, Y., Siang Hui Tan, C., Laude, A. & Wai Yee, Y. (2017). Novel method for fabrication of functional-led, Ultrathin, Free-standing and Nanoporous Polymer Membranes for Retinal Tissue Engineering. Journal of Materials Chemistry B, 5(28), 5616-5622. https://doi.org/10.1039/C7TB00376E

Agarwala, S. & Wai Yee, Y. (2016). 3D Printed Electronic Tracks for Bio-integrated Free-form Devices. In Proceedings of the 2nd International Conference on Progress in Additive Manufacturing (Vol. Part F129095, pp. 313-317)

Agarwala, S. (2016). A Perspective on 3D Bioprinting Technology: Present and Future. American Journal of Engineering and Applied Sciences, 9(4), 985-990. https://doi.org/10.3844/ajeassp.2016.985.990

Dikshit, V., Prasanth Nagalingam, A., Kumar, J. D., Yap, Y. L., Agarwala, S. & Wai Yee, Y. (2016). Out of plane compressive strength of 3D printed vertical pillared corrugated core structure. In Proceedings of the 2nd International Conference on Progress in Additive Manufacturin (Vol. Part F129095, pp. 128-133). Research Publishing, Singapore.

Dong Goh, G., Agarwala, S., Liang Goh, G., Dikshit, V., Sing, S. L. & Yeong, W. Y. (2016). Additive manufacturing in Unmanned Aerial Vehicles (UAV): challenges and potential. Aerospace Science and Technology, 63, 140-151. https://doi.org/10.1016/j.ast.2016.12.019

Liang Goh, G., Agarwala, S. & Wai Yee, Y. (2016). 3D printing of microfludic sensor for soft robots: a preliminary study in design and fabrication. In Proceedings of the 2nd International Conference on Progress in Additive Manufacturing (Pro-AM 2016) (Vol. Part F129095, pp. 177-181). Research Publishing, Singapore. https://doi.org/10.3850/2424-8967_V02-N778

Liang Goh, G., Ma, J., Chua, K. L. F., Agarwala, S., Wai Yee, Y. & Ping Zhang, Y. (2016). Inkjet printed patch antenna emitter for wireless communication application. Journal Virtual and Physical Prototyping, 11(4), 289-294. https://doi.org/10.1080/17452759.2016.1229802

Displaying results 1 to 50 out of 65

1

Revised 10.08.2023

-

Shweta Agarwala