Publications by Electronics & Photonics

Are you looking for publications by Section of Electronics & Photonics? On this page you can find all the publications made by the Section of Electronics & Photonics - Department of Electrical and Computer Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and titles. The list can be sorted by date, author, and title:

List of Publications

Sortér efter: Dato | Forfatter | Titel

Zamani, M., Rezaeiyan, Y., Shoaei, O. & Serdijn, W. A. (2018). A 1.55 μW Bio-Impedance Measurement System for Implantable Cardiac Pacemakers in 0.18 μm CMOS. IEEE Transactions on Biomedical Circuits and Systems, 12(1), 211 - 221. Artikel 8248760. https://doi.org/10.1109/TBCAS.2017.2776528

Asyaei, M. & Moradi, F. (2018). A domino circuit technique for noise-immune high fan-in gates. Journal of Circuits, Systems and Computers, 27(10), Artikel 1850151. https://doi.org/10.1142/S0218126618501517

Agarwala, S., Liang Goh, G. & Wai Yee, Y. (2018). Aerosol jet printed pH sensor based on carbon nanotubes for flexible electronics. I Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018) (Bind 2018-May, s. 88-94) https://doi.org/10.25341/D4Q59F

Nasserian, M., Peiravi, A. & Moradi, F. (2018). A fully-integrated 16-channel EEG readout front-end for neural recording applications. AEÜ - International Journal of Electronics and Communications, 94, 109-121. https://doi.org/10.1016/j.aeue.2018.06.045

Akbari, M., Hashemipour, O. & Moradi, F. (2018). A High Slew Rate CMOS OTA with Dynamic Current Boosting Paths. I 2018 IEEE International Symposium on Circuits and Systems, ISCAS 2018 - Proceedings (Bind 2018). Artikel 8350926 IEEE. https://doi.org/10.1109/ISCAS.2018.8350926

Farkhani, H., Tohidi, M., Farkhani, S., Madsen, J. K. & Moradi, F. (2018). A Low-Power High-Speed Spintronics-Based Neuromorphic Computing System Using Real-Time Tracking Method. IEEE Journal on Emerging and Selected Topics in Circuits and Systems, 8(3), 627-638. Artikel 8309300. https://doi.org/10.1109/JETCAS.2018.2813389

Akbari, M., Hashemipour, O., Khateb, F. & Moradi, F. (2018). An Energy-Efficient DAC Switching Algorithm Based on Charge Recycling Method for SAR ADCs. Microelectronics Journal, 82, 29-35. https://doi.org/10.1016/j.mejo.2018.10.011

Bagheriye, L., Toofan, S., Saeidi, R. & Moradi, F. (2018). A Novel Sensing Circuit with Large Sensing Margin for Embedded Spin-Transfer Torque MRAMs. I 2018 IEEE International Symposium on Circuits and Systems, ISCAS 2018 - Proceedings: Proceedings (s. 1-5). Artikel 8351577 IEEE. https://doi.org/10.1109/ISCAS.2018.8351577

Fani, S. H., Peiravi, A., Farkhani, H. & Moradi, F. (2018). A novel TFET 8T-SRAM cell with improved noise margin and stability. I Proceedings - 21st IEEE International Symposium on Design and Diagnostics of Electronic Circuits and Systems: DDECS 2018 (s. 39-44). IEEE. https://doi.org/10.1109/DDECS.2018.00014

Slavensky, H. & Lysgaard, P. (2018). A quantitative and qualitative analysis of online student retention. I EDULEARN18 Proceedings: 10th International Conference on Education and New Learning Technologies (s. 2443-2450). International Association of Technology, Education and Development (IATED). https://doi.org/10.21125/edulearn.2018.0664

Bagheriye, L., Toofan, S., Saeidi, R., Zeinali, B. & Moradi, F. (2018). A Reduced Store/Restore Energy MRAM-Based SRAM Cell for a Non-Volatile Dynamically Reconfigurable FPGA. IEEE Transactions on Circuits and Systems II: Express Briefs, 65(11), 1708-1712. Artikel 8090896. https://doi.org/10.1109/TCSII.2017.2768409

Iandolo, B., Davidsen, R. S. & Hansen, O. (2018). Avoiding blistering in Al2O3 deposited on planar and black Si. Solar Energy Materials & Solar Cells, 187, 23-29. https://doi.org/10.1016/j.solmat.2018.07.014

Pizzuto, A., Klarskov, P. & Mittleman, D. M. (2018). Bias Dependence of Laser Terahertz Emission Nanoscopy. I CLEO: Applications and Technology, CLEO_AT 2018 Artikel JM1A.3 https://doi.org/10.1364/cleo_at.2018.jm1a.3

Agarwala, S., Liang Goh, G. & Wai Yee, Y. (2018). High resolution of aerosol jet printing of conducting ink for stretchable electronics. I Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018 (Bind 2018-May, s. 109-114) https://doi.org/10.25341/D4FS3W

Pedersen, P. K., Pizzuto, A. & Mittleman, D. M. (2018). Imaging on the Nanoscale with Terahertz Time-Domain and Emission Microscopy. I International Symposium on Ultrafast Phenomena and Terahertz Waves, ISUPTW 2018 Artikel ThB3 https://doi.org/10.1364/isuptw.2018.thb3

Klarskov, P., Pizzuto, A. & Mittleman, D. M. (2018). Imaging on the Nanoscale with THz Time-Domain, Emission and Pump-Probe Microscopy. I 2018 43rd International Conference on Infrared Millimeter and Terahertz Waves, IRMMW-THz 2018 Artikel 8509949 https://doi.org/10.1109/irmmw-thz.2018.8509949

Klarskov, P., Pizzuto, A. & Mittleman, D. M. (2018). Imaging on the Nanoscale with THz Time-Domain, Emission and Pump-Probe Microscopy: 2018 43rd International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz). 1-2. https://doi.org/10.1109/IRMMW-THz.2018.8509949

Akbari, M., Hashemipour, O. & Moradi, F. (2018). Input Offset Estimation of CMOS Integrated Circuits in Weak Inversion. I E E E Transactions on Very Large Scale Integration (VLSI) Systems, 26(9), 1812-1816. Artikel 8362694. https://doi.org/10.1109/TVLSI.2018.2830749

Pizzuto, A., Klarskov, P. & Mittleman, D. M. (2018). Laser Terahertz Emission Nanoscopy. I 2018 Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2018 Artikel Tu3C.2 https://doi.org/10.1364/cleopr.2018.tu3c.2

Knudsen, M. B., Kæseler, S. A. & Rohde, J. (2018). LoRaWAN End-Device Antenna Performance. I CEMi 2018 - International Workshop on Computing, Electromagnetics, and Machine Intelligence (s. 77-78). Artikel 8610536 IEEE. https://doi.org/10.1109/CEMI.2018.8610536

Tohidi, M., Madsen, J. K. & Moradi, F. (2018). Low-Power, Low-Noise Epileptic-Seizure Detection System with High Accuracy Using EEG Signals. Poster session præsenteret på Biomedical Circuits and Systems Conference, Cleveland, USA. https://www.epapers.org/biocas2018/ESR/paper_details.php?PHPSESSID=ok076vdjtkiu7kett65d8hk0g0&paper_id=6066

Bagheriye, L., Toofan, S., Saeidi, R. & Moradi, F. (2018). Offset-Compensated High-Speed Sense Amplifier for STT-MRAMs. I E E E Transactions on Very Large Scale Integration (VLSI) Systems, 26(6), 1051-1058. https://doi.org/10.1109/TVLSI.2018.2808140

Varghani, A., Peiravi, A. & Moradi, F. (2018). Perpendicular STT_RAM Cell in 8nm Technology Node Using Co1/Ni3(111)||Gr2||Co1/Ni3(111) Structure as Magnetic Tunnel Junction. Journal of Magnetism and Magnetic Materials, 452, 10-16. https://doi.org/10.1016/j.jmmm.2017.12.021

Benatto, G. A. D. R., Chi, M., B Jensen, O., Santamaria Lancia, A. A., Riedel-Lyngskær, N., Iandolo, B., Davidsen, R. S., Hansen, O., Thorsteinsson, S. & Behrensdorff Poulsen, P. (2018). Photoluminescence imaging induced by laser line scan: Study for outdoor field inspections. I 2018 IEEE 7th World Conference on Photovoltaic Energy Conversion (WCPEC) (s. 395-399) https://doi.org/10.1109/PVSC.2018.8547416

Zeinali, B., Karsinos, D. & Moradi, F. (2018). Progressive Scaled STT-RAM for Approximate Computing in Multimedia Applications. IEEE Transactions on Circuits and Systems II: Express Briefs, 65(7), 938-942. https://doi.org/10.1109/TCSII.2017.2738844

Lundager, K. & Moradi, F. (2017). A 2.9nW Ultra-Low Power Ripple-Voltage MPPT for Autonomous Miniature Sensor Nodes. I 2017 IEEE SOI-3D-Subthreshold Microelectronics Unified Conference, S3S 2017: (S3S) (s. 1-2). IEEE. https://doi.org/10.1109/S3S.2017.8309251

Slavensky, H., Hansen, H. J. & Knudsen, M. B. (2017). BOOSTING STUDENT LIFE SATISFACTION AND ENGAGEMENT TO IMPROVE ONLINE STUDENT RETENTION. I Proceedings of the 9th International Conference on Education and New Learning Technologies: EDULEARN17 Proceedings (s. 5042-5050). International Association of Technology, Education and Development (IATED). https://doi.org/10.21125/edulearn.2017.2131

Akbari, M., Hashemipour, O. & Moradi, F. (2017). Design and Analysis of an Ultra-Low-Power Second-Order Asynchronous Delta–Sigma Modulator. Circuits, Systems, and Signal Processing, 36(12), 4919-4936. https://doi.org/10.1007/s00034-017-0658-7

Godsk, M., Hansen, H. J., Knudsen, M. B., Lindhardtsen, M. R., Lysgaard, P. & Slavensky, H. (2017). ENERGISING ELECTRONICS ENGINEERING: IMPROVING LEARNING BY FLIPPING THE CLASSROOM AND GOING ONLINE. Abstract fra INTED 2017, Valencia, Spanien. https://iated.org/concrete3/view_abstract.php?paper_id=56540

Godsk, M., Hansen, H. J., Knudsen, M. B., Lindhardtsen, M. R., Lysgaard, P. & Slavensky, H. (2017). ENERGISING ELECTRONICS ENGINEERING: IMPROVING LEARNING BY FLIPPING THE CLASSROOM AND GOING ONLINE. I Proceedings of the 11th International Technology, Education and Development Conference: INTED2017 Proceedings (s. 8523-8530). International Association of Technology, Education and Development (IATED). https://doi.org/10.21125/inted.2017.2015

Klarskov, P., Kim, H., Colvin, V. L. & Mittleman, D. M. (2017). Imaging single nanoparticles using laser terahertz emission nanoscopy. I 2017 42nd International Conference on Infrared, Millimeter, and Terahertz Waves, IRMMW-THz 2017 Artikel 8067202 https://doi.org/10.1109/irmmw-thz.2017.8067202

Zeinali, B., Madsen, J. K., Raghavan, P. & Moradi, F. (2017). Low-leakage sub-threshold 9T-SRAM cell in 14-nm FinFET technology. International Journal of Circuit Theory and Applications, 45(11), 1647-1659. https://doi.org/10.1002/cta.2280

M. Plakhotnyuk, M., Gaudig, M., Davidsen, R. S., Lindhard, J. M., Hirsch, J., Lausch, D., Stenbæk Schmidt, M., Stamate, E. & Hansen, O. (2017). Low surface damage dry etched black silicon. Journal of Applied Physics, 122(14), Artikel 143101. https://doi.org/10.1063/1.4993425

Lehmann, A. (2017). Modelling Emission of Pollutants from transportation using mobile sensing data: Advancing modelling of street level pollution and climate forcing gas emissions. Århus Universitet.

Zeinali, B., Esmaeili, M., Madsen, J. K. & Moradi, F. (2017). Multilevel SOT-MRAM Cell with a Novel Sensing Scheme for High-Density Memory Applications. I 2017 47th European Solid-State Device Research Conference, ESSDERC 2017: ESSDERC 2017 (s. 172-175). Artikel 8066619 IEEE. https://doi.org/10.1109/ESSDERC.2017.8066619

Klarskov, P., Kim, H., Colvin, V. L. & Mittleman, D. M. (2017). Nanoscale Laser Terahertz Emission Microscopy. ACS Photonics, 4(11), 2676-2680. https://doi.org/10.1021/acsphotonics.7b00870

Klarskov, P., Kim, H., Colvin, V. & Mittleman, D. M. (2017). Nanoscale Terahertz Emission Spectroscopy. I Advanced Photonics, Sensors 2017 https://doi.org/10.1364/sensors.2017.seth1e.4

Ghanatian, H., Hosseini, S. E., Zeinali, B. & Moradi, F. (2017). Quasi-Schottky-Barrier UTBB SOI MOSFET for Low-Power Robust SRAMs. IEEE Transactions on Electron Devices, 64(4), 1575-1582. Artikel 7875448. https://doi.org/10.1109/TED.2017.2672968

Payne, D. N. R., Abbott, M. D., Claville Lopez, A., Zeng, Y., Hang Fung, T., R. McIntosh, K., Cruz-Campa, J., Davidsen, R. S., Plakhotnyuk, M. & Bagnall, D. M. (2017). Rapid optical modelling of plasma textured silicon. I Proceedings of the 33rd European Photovoltaic Solar Energy Conference and Exhibition (EUPVSEC)

Lehmann, A. & Gross, A. (2017). Towards vehicle emission estimation from smartphone sensors. I Proceedings - 18th IEEE International Conference on Mobile Data Management, MDM 2017 (s. 154-163). Artikel 7962447 IEEE Press. https://doi.org/10.1109/MDM.2017.29

Zeinali, B., Madsen, J. K., Raghavan, P. & Moradi, F. (2017). Ultra-Fast SOT-MRAM Cell with STT Current for Deterministic Switching. I Proceedings - 35th IEEE International Conference on Computer Design, ICCD 2017: ICCD 2017 (s. 463-468). Artikel 8119254 IEEE. https://doi.org/10.1109/ICCD.2017.81

Agarwala, S. & Wai Yee, Y. (2016). 3D Printed Electronic Tracks for Bio-integrated Free-form Devices. I Proceedings of the 2nd International Conference on Progress in Additive Manufacturing (Bind Part F129095, s. 313-317)

Liang Goh, G., Agarwala, S. & Wai Yee, Y. (2016). 3D printing of microfludic sensor for soft robots: a preliminary study in design and fabrication. I Proceedings of the 2nd International Conference on Progress in Additive Manufacturing (Pro-AM 2016) (Bind Part F129095, s. 177-181). Research Publishing, Singapore. https://doi.org/10.3850/2424-8967_V02-N778

Nasserian, M., Peiravi, A. & Moradi, F. (2016). A 1.62 µW 8-Channel Ultra-High Input Impedance EEG Amplifier for Dry and Non-Contact Biopotential Recording Applications. I 2016 IFIP/IEEE International Conference on Very Large Scale Integration, VLSI-SoC 2016: VLSI-SoC (Bind 2016). Artikel 7753539 IEEE Press. https://doi.org/10.1109/VLSI-SoC.2016.7753539

Nasserian, M., Kafi-Kangi, M., Maymandi Nejad, M. & Moradi, F. (2016). A Low-Power Fast Tag Comparator by Modifying Charging Scheme of Wide Fan-in Dynamic OR gates. Integration, 52(January), 129-141. https://doi.org/10.1016/j.vlsi.2015.09.004

Assarzadeh, M., Saberi, M., Tohidi, M. & Moradi, F. (2016). A Low-Power Time-Based Phase-Domain Analog-to-Digital Converter. I 2016 IEEE International Conference on Electronics, Circuits and Systems, ICECS 2016: ICECS 2016 (s. 21-24). Artikel 7841122 IEEE Press. https://doi.org/10.1109/ICECS.2016.7841122

Klarskov, P., Tarekegne, A. T., Iwaszczuk, K., Zhang, X.-C. & Jepsen, P. U. (2016). Amplification of resonant field enhancement by plasmonic lattice coupling in metallic slit arrays. Scientific Reports, 6, Artikel 37738. https://doi.org/10.1038/srep37738

Davidsen, R. S., Ormstrup, J., Lind Ommen, M., Larsen, P. E., Stenbæk Schmidt, M., Boisen, A., Nordseth, Ø. & Hansen, O. (2016). Angle resolved characterization of nanostructured and conventionally textured silicon solar cells. Solar Energy Materials & Solar Cells, 140, 134-140. https://doi.org/10.1016/j.solmat.2015.04.001

Zeinali, B., Madsen, J. K., Raghavan, P. & Moradi, F. (2016). A Novel Nondestructive Bit-Line Discharging Scheme for Deep Submicrometer STT-RAM. Afhandling præsenteret på The 34th IEEE International Conference on Computer Design, Phoenix, USA.

Agarwala, S. (2016). A Perspective on 3D Bioprinting Technology: Present and Future. American Journal of Engineering and Applied Sciences, 9(4), 985-990. https://doi.org/10.3844/ajeassp.2016.985.990

Viser resultater 151 til 200 ud af 251

Forrige

Næste

Back to the main page

Revideret 10.08.2023

AU Engineering