Find

Til studerende
Til ph.d.er
Til medarbejdere

Institut for Elektro- og Computerteknologi

Publications by Electronics & Photonics

Are you looking for publications by Section of Electronics & Photonics? On this page you can find all the publications made by the Section of Electronics & Photonics - Department of Electrical and Computer Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and titles. The list can be sorted by date, author, and title:

List of Publications

Sortér efter: Dato | Forfatter | Titel

Shreya, S. & Kaushik, B. K. (2019). Modeling of Voltage-Controlled Spin–Orbit Torque MRAM for Multilevel Switching Application. IEEE Transactions on Electron Devices, 67(1), 90. Artikel 19312204. https://doi.org/0.1109/TED.2019.2951684

Koolivand, Y., Rezaeiyan, Y., Shoaei, O., Jafarabadi-Ashtiani, S., Moftakharzadeh, A. & Ahmadvand , M. (2019). Modified linear in dB, sub 0.2 dB gain-step CMOS programmable gain amplifier for ultrasound applications. Analog Integrated Circuits and Signal Processing, 99(3), 497–508. https://doi.org/10.1007/s10470-019-01408-y

Hosseini, S., Laursen, K., Rashidi, A. & Moradi, F. (2019). Multi-Ring Ultrasonic Transducer on a Single Piezoelectric Disk For Powering Biomedical Implants. I 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019 (s. 3827-3830). Artikel 8857473 IEEE. https://doi.org/10.1109/EMBC.2019.8857473

Rashidi, A., Laursen, K., Hosseini, S. & Moradi, F. (2019). Overvoltage Protection Circuits for Ultrasonically Powered Implantable Microsystems. I 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019 (s. 4354-4358). Artikel 8857795 IEEE. https://doi.org/10.1109/EMBC.2019.8857795

Han, Z., Ohno, S. & Minamide, H. (2019). Phase singularity in double-layer metamaterial based on lattice resonance. I IRMMW-THz 2019 - 44th International Conference on Infrared, Millimeter, and Terahertz Waves Artikel 8873757 IEEE Computer Society. https://doi.org/10.1109/IRMMW-THz.2019.8873757

Hosseini, S., Rashidi, A., Laursen, K., Pelloux-Prayer, J. M. A. & Moradi, F. (2019). Piezoelectric Energy Harvester with Piezo-Magnet Stack for Ultrasonically-Powered Brain Implants. I 2019 IEEE International Ultrasonics Symposium, IUS 2019 (s. 201-204). Artikel 8926195 IEEE. https://doi.org/10.1109/ULTSYM.2019.8926195

Dong Goh, G., Ling Yap, Y., Agarwala, S. & Wai Yee, Y. (2019). Recent progress in Additive Manufacturing of Fiber Reinforced Polymer Composite. Advanced Materials Interfaces, 4(1), Artikel 1800271. https://doi.org/10.1002/admt.201800271

Zeinali, B. & Moradi, F. (2019). Sensing of spintronic memories. I S. Ghosh (red.), Sensing of Non-Volatile Memory Demystified (s. 1-30). Springer. https://doi.org/10.1007/978-3-319-97347-0

Goh, G. L., Saengchairat, N., Agarwala, S., Yeong, W. Y. & Tran, T. (2019). Sessile droplets containing carbon nanotubes: A study of evaporation dynamics and CNT alignment for printed electronics. Nanoscale, 11(22), 10603-10614. https://doi.org/10.1039/c9nr03261d

Moradi, F., Farkhani, H., Zeinali, B., Ghanatian, H., Pelloux-Prayer, J. M. A., Boehnert, T., Zahedinejad, M., Heidari, H., Nabaei, V., Ferreira, R., Akerman, J. & Madsen, J. K. (2019). Spin-Orbit-Torque-based Devices, Circuits and Architectures. ArXiv. https://arxiv.org/abs/1912.01347

Farkhani, H., Böhnert, T., Tarequzzaman, M., Costa, D., Jenkins, A., Ferreira, R. & Moradi, F. (2019). Spin-Torque-Nano-Oscillator based neuromorphic computing assisted by laser. I Proceedings - 2019 14th IEEE International Conference on Design and Technology of Integrated Systems In Nanoscale Era, DTIS 2019 Artikel 8734967 IEEE. https://doi.org/10.1109/DTIS.2019.8734967

Rashidi, A., Hosseini, S., Laursen, K. & Moradi, F. (2019). STARDUST: Optogenetics, Electrophysiology and Pharmacology with an Ultrasonically Powered DUST for Parkinson's Disease. I 2019 26th IEEE International Conference on Electronics, Circuits and Systems, ICECS 2019 (s. 109-110). Artikel 8965042 IEEE. https://doi.org/10.1109/ICECS46596.2019.8965042

Keiser, G. R. & Klarskov, P. (2019). Terahertz field confinement in nonlinear metamaterials and near-field imaging. Photonics, 6(1), Artikel 22. https://doi.org/10.3390/photonics6010022

Agarwala, S., Liang Goh, G., Dinh Le, T.-S., An, J., Kai Peh, Z., Yeong, W. Y. & Kim, Y.-J. (2019). Wearable Bandage based Strain Sensor for Home Healthcare: Combining 3D Aerosol Jet Printing and Laser Sintering. ACS Sensors, 4(1), 218-226. https://doi.org/10.1021/acssensors.8b01293

Agarwala, S., Min Lee, J., Wai Yee, Y. & Layani, M. (2018). 3D printed bioelectronic platform with embedded electronics. MRS Advances, 3(50), 2991-3002. https://doi.org/10.1557/adv.2018.431

Rezaeiyan, Y. & Shoaei, O. (2018). A 0.36 μW/channel recorder for external ambulatory ECG recorders. Analog Integrated Circuits and Signal Processing, 95(1), 17–29. https://doi.org/10.1007/s10470-018-1124-6

Rezaeiyan, Y., Zamani, M., Shoaei, O. & Serdijn, W. A. (2018). A 0.5 μA/Channel front-end for implantable and external ambulatory ECG recorders. Microelectronics Journal, 74, 79-85. https://doi.org/10.1016/j.mejo.2018.01.016

Zamani, M., Rezaeiyan, Y., Shoaei, O. & Serdijn, W. A. (2018). A 1.55 μW Bio-Impedance Measurement System for Implantable Cardiac Pacemakers in 0.18 μm CMOS. IEEE Transactions on Biomedical Circuits and Systems, 12(1), 211 - 221. Artikel 8248760. https://doi.org/10.1109/TBCAS.2017.2776528

Lundager, K. & Moradi, F. (2018). A 2.9nW Ultra-Low Power Ripple-Voltage MPPT for Autonomous Miniature Sensor Nodes. I 2017 IEEE SOI-3D-Subthreshold Microelectronics Unified Conference, S3S 2017: (S3S) (s. 1-2). IEEE. https://doi.org/10.1109/S3S.2017.8309251

Liang Goh, G., Agarwala, S., Dong Goh, G., Kuan Joel Tan, H., Zhao, L., Kuan Chuah, T. & Wai Yee, Y. (2018). Additively Manufactured Multi-material Free-form Structure with Printed Electronics. International Journal of Advanced Manufacturing Technology, 94(1-4), 1309-1316. https://doi.org/10.1007/s00170-017-0972-z

Asyaei, M. & Moradi, F. (2018). A domino circuit technique for noise-immune high fan-in gates. Journal of Circuits, Systems and Computers, 27(10), Artikel 1850151. https://doi.org/10.1142/S0218126618501517

Agarwala, S., Liang Goh, G. & Wai Yee, Y. (2018). Aerosol jet printed pH sensor based on carbon nanotubes for flexible electronics. I Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018) (Bind 2018-May, s. 88-94) https://doi.org/10.25341/D4Q59F

Nasserian, M., Peiravi, A. & Moradi, F. (2018). A fully-integrated 16-channel EEG readout front-end for neural recording applications. AEÜ - International Journal of Electronics and Communications, 94, 109-121. https://doi.org/10.1016/j.aeue.2018.06.045

Akbari, M., Hashemipour, O. & Moradi, F. (2018). A High Slew Rate CMOS OTA with Dynamic Current Boosting Paths. I 2018 IEEE International Symposium on Circuits and Systems, ISCAS 2018 - Proceedings (Bind 2018). Artikel 8350926 IEEE. https://doi.org/10.1109/ISCAS.2018.8350926

Liang Goh, G., Agarwala, S., Jun Tan, Y. & Wai Yee, Y. (2018). A low cost and flexible carbon nanotube pH sensor fabricated using Aerosol jet technology for live cell applications. Sensors and Actuators B: Chemical, 260, 227-235. https://doi.org/10.1016/j.snb.2017.12.127

Farkhani, H., Tohidi, M., Farkhani, S., Madsen, J. K. & Moradi, F. (2018). A Low-Power High-Speed Spintronics-Based Neuromorphic Computing System Using Real-Time Tracking Method. IEEE Journal on Emerging and Selected Topics in Circuits and Systems, 8(3), 627-638. Artikel 8309300. https://doi.org/10.1109/JETCAS.2018.2813389

Akbari, M., Hashemipour, O., Khateb, F. & Moradi, F. (2018). An Energy-Efficient DAC Switching Algorithm Based on Charge Recycling Method for SAR ADCs. Microelectronics Journal, 82, 29-35. https://doi.org/10.1016/j.mejo.2018.10.011

Farkhani, H., Tohidi, M., Farkhani, S., Madsen, J. K. & Moradi, F. (2018). An Energy Efficient Neuromorphic Computing System Using Real Time Sensing Method. I 2017 IEEE Biomedical Circuits and Systems Conference, BioCAS 2017 - Proceedings: BioCAS (s. 685-688). Artikel 7199 IEEE. https://doi.org/10.1109/BIOCAS.2017.8325233

Agarwala, S., Min Lee, J., Long Ng, W., Layani, M., Wai Yee, Y. & Magdassi, S. (2018). A novel 3D bioprinted flexible and biocompatible hydrogel bioelectronic platform. Biosensors and Bioelectronics, 102, 365-371. https://doi.org/10.1016/j.bios.2017.11.039

Bagheriye, L., Toofan, S., Saeidi, R. & Moradi, F. (2018). A Novel Sensing Circuit with Large Sensing Margin for Embedded Spin-Transfer Torque MRAMs. I 2018 IEEE International Symposium on Circuits and Systems, ISCAS 2018 - Proceedings: Proceedings (s. 1-5). Artikel 8351577 IEEE. https://doi.org/10.1109/ISCAS.2018.8351577

Fani, S. H., Peiravi, A., Farkhani, H. & Moradi, F. (2018). A novel TFET 8T-SRAM cell with improved noise margin and stability. I Proceedings - 21st IEEE International Symposium on Design and Diagnostics of Electronic Circuits and Systems: DDECS 2018 (s. 39-44). IEEE. https://doi.org/10.1109/DDECS.2018.00014

Slavensky, H. & Lysgaard, P. (2018). A quantitative and qualitative analysis of online student retention. I EDULEARN18 Proceedings: 10th International Conference on Education and New Learning Technologies (s. 2443-2450). International Association of Technology, Education and Development (IATED). https://doi.org/10.21125/edulearn.2018.0664

Bagheriye, L., Toofan, S., Saeidi, R., Zeinali, B. & Moradi, F. (2018). A Reduced Store/Restore Energy MRAM-Based SRAM Cell for a Non-Volatile Dynamically Reconfigurable FPGA. IEEE Transactions on Circuits and Systems II: Express Briefs, 65(11), 1708-1712. Artikel 8090896. https://doi.org/10.1109/TCSII.2017.2768409

Iandolo, B., Davidsen, R. S. & Hansen, O. (2018). Avoiding blistering in Al2O3 deposited on planar and black Si. Solar Energy Materials & Solar Cells, 187, 23-29. https://doi.org/10.1016/j.solmat.2018.07.014

Pizzuto, A., Klarskov, P. & Mittleman, D. M. (2018). Bias Dependence of Laser Terahertz Emission Nanoscopy. I CLEO: Applications and Technology, CLEO_AT 2018 Artikel JM1A.3 https://doi.org/10.1364/cleo_at.2018.jm1a.3

Dong Goh, G., Dikshit, V., Prasanth Nagalingam, A., Liang Goh, G., Agarwala, S., Sing, S. L., Wei, J. & Yeong, W. Y. (2018). Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics, Materials & Design, 137, 79-89. https://doi.org/10.1016/j.matdes.2017.10.021

Agarwala, S., Liang Goh, G. & Wai Yee, Y. (2018). High resolution of aerosol jet printing of conducting ink for stretchable electronics. I Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018 (Bind 2018-May, s. 109-114) https://doi.org/10.25341/D4FS3W

Pedersen, P. K., Pizzuto, A. & Mittleman, D. M. (2018). Imaging on the Nanoscale with Terahertz Time-Domain and Emission Microscopy. I International Symposium on Ultrafast Phenomena and Terahertz Waves, ISUPTW 2018 Artikel ThB3 https://doi.org/10.1364/isuptw.2018.thb3

Klarskov, P., Pizzuto, A. & Mittleman, D. M. (2018). Imaging on the Nanoscale with THz Time-Domain, Emission and Pump-Probe Microscopy. I 2018 43rd International Conference on Infrared Millimeter and Terahertz Waves, IRMMW-THz 2018 Artikel 8509949 https://doi.org/10.1109/irmmw-thz.2018.8509949

Klarskov, P., Pizzuto, A. & Mittleman, D. M. (2018). Imaging on the Nanoscale with THz Time-Domain, Emission and Pump-Probe Microscopy: 2018 43rd International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz). 1-2. https://doi.org/10.1109/IRMMW-THz.2018.8509949

Akbari, M., Hashemipour, O. & Moradi, F. (2018). Input Offset Estimation of CMOS Integrated Circuits in Weak Inversion. I E E E Transactions on Very Large Scale Integration (VLSI) Systems, 26(9), 1812-1816. Artikel 8362694. https://doi.org/10.1109/TVLSI.2018.2830749

Pizzuto, A., Klarskov, P. & Mittleman, D. M. (2018). Laser Terahertz Emission Nanoscopy. I 2018 Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2018 Artikel Tu3C.2 https://doi.org/10.1364/cleopr.2018.tu3c.2

Tohidi, M., Madsen, J. K. & Moradi, F. (2018). Low-Power, Low-Noise Epileptic-Seizure Detection System with High Accuracy Using EEG Signals. Poster-session præsenteret på Biomedical Circuits and Systems Conference, Cleveland, USA. https://www.epapers.org/biocas2018/ESR/paper_details.php?PHPSESSID=ok076vdjtkiu7kett65d8hk0g0&paper_id=6066

Han, Z., Ohno, S., Tokizane, Y., Nawata, K., Notake, T., Takida, Y. & Minamide, H. (2018). Off-resonance and in-resonance metamaterial design for a high-transmission terahertz-wave quarter-wave plate. Optics Letters, 43(12), 2977-2980. https://doi.org/10.1364/OL.43.002977

Bagheriye, L., Toofan, S., Saeidi, R. & Moradi, F. (2018). Offset-Compensated High-Speed Sense Amplifier for STT-MRAMs. I E E E Transactions on Very Large Scale Integration (VLSI) Systems, 26(6), 1051-1058. https://doi.org/10.1109/TVLSI.2018.2808140

Shreya, S. & Kaushik, B. K. (2018). Performance analysis of DSHE based memories. Abstract fra SPIE NanoScience + Engineering, California, USA. https://doi.org/10.1117/12.2321249

Varghani, A., Peiravi, A. & Moradi, F. (2018). Perpendicular STT_RAM Cell in 8nm Technology Node Using Co1/Ni3(111)||Gr2||Co1/Ni3(111) Structure as Magnetic Tunnel Junction. Journal of Magnetism and Magnetic Materials, 452, 10-16. https://doi.org/10.1016/j.jmmm.2017.12.021

Benatto, G. A. D. R., Chi, M., B Jensen, O., Santamaria Lancia, A. A., Riedel-Lyngskær, N., Iandolo, B., Davidsen, R. S., Hansen, O., Thorsteinsson, S. & Behrensdorff Poulsen, P. (2018). Photoluminescence imaging induced by laser line scan: Study for outdoor field inspections. I 2018 IEEE 7th World Conference on Photovoltaic Energy Conversion (WCPEC) (s. 395-399) https://doi.org/10.1109/PVSC.2018.8547416

Zeinali, B., Karsinos, D. & Moradi, F. (2018). Progressive Scaled STT-RAM for Approximate Computing in Multimedia Applications. IEEE Transactions on Circuits and Systems II: Express Briefs, 65(7), 938-942. https://doi.org/10.1109/TCSII.2017.2738844

Dong Goh, G., Agarwala, S., Liang Goh, G., Dikshit, V., Sing, S. L. & Yeong, W. Y. (2017). Additive manufacturing in Unmanned Aerial Vehicles (UAV): challenges and potential. Aerospace Science and Technology, 63, 140-151. https://doi.org/10.1016/j.ast.2016.12.019

Viser resultater 201 til 250 ud af 367

5

Back to the main page

Revideret 10.08.2023

-

AU Engineering